Login
New Office Parts in North Carolina (NC) : Page 6
- 171 Results
- Switch to Photo View
-
Show:
KNEE/TILT MECHANISM Activation: top activation w/single lever. · Cylinder taper: 17-4 · Tilt lock method : push/pull · Tilt tension adjustment knob · Color : black Model # 29-S3926 (item #2286)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
For converting lateral file drawer or shelf from any other filing format to side to side format. Use in conjunction with separately specified front to back hanging bars for front o back filing. Standard in black finish color only. (item #2023)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
for hinge removal and glide adjustment Steelcase Series 9000, Steelcase Valencia and Steelcase Avenir systems (item #3103)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Cole Lateral File Bar Available for cabinets 30", 36" and 42" Wide Cole Front to back File Rail Quality constructed to O.E.M. specifications. Galvanized finish. Specify cabinet size: 30", 36" or 42" exterior width. In stock & available for immediate shipping! (item #7635)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Features: Easy to install and ready to use, Pre-cut to fit, Protects floor from scuff marks, Lasts longer than plastic glide caps and designed to glide smoothly across most surfaces. Pre-Cut Tennis Balls are designed to protect both carpet and tile floors, Extend the life of your carpets and floors while cutting down on noise and damage of daily wear. (item #18719)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Herman Miller Aeron Gas cylinder Replacement Bearing Kit. It's always a good ides to replace these parts anytime a base is removed. Schematic is included with each kit. Part # 108 Includes shipping to anywhere in the continental US! (item #2583)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
The only glides recommended by flooring manufacturers and installers, Safeglides provide maximum protection against marring, scratching, or denting wood, cushioned vinyl, tile and marble. The wood felt & plastic are skillfully and permanently bonded. They won't rust or corrode like metal glides. Felt, plastic and steel are permanently combined to give you our most popular glide for wooden furniture. No need for drilling or gluing. Install easily with the tap of a hammer into end grain. (item #3417)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Complete Kit, Ready To Install! Fits Vertical Filing Cabinets Made By Signore Includes Installation Instruction Sheet (item #2047)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Easily moves your heaviest furniture & protects floors. Heavy duty self-stick, rubber based adhesive pads bonded to polymer plastic disks. Bonds permanently to most furniture surfaces: wood, laminate, metal and plastic. Attaches securely to bottom of desks, wall units, bookcases, TV stands, bureaus and more. Slides easily on carpeting, wood floors, ceramic tiles, linoleum and smooth surfaces. Cushioned to absorb the impact of floor surface changes. (item #2644)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
BB Caster: 2-1/2" diameter hard double wheel caster 7/16"x 7/8" stem "B" for use on carpet only 2-1/2" diameter soft polyurethane thread double wheel caster 7/16"x 7/8" stem "B" for use on non-carpet only wood, tile, bamboo flooring BX Caster: 3" diameter hard double wheel caster black nylon wheels and yoke 7/16"x 7/8" stem "B" 3" diameter soft polyurethane thread double wheel caster black nylon wheels and yoke 7/16"x 7/8" stem "B" for use on non-carpet only Applicable on: Aeron® ,Ambi® ,Caper® ,Celle® ,Equa 2® Chairs,Ergon 3® ,Mirra® ,Reaction® Chairs, (item #4373)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
We have a large variety of new chairs available at any time. All different types and sizes! 24/7 Ultimate Heavyweight Chair Series Big and Tall Bariatric Seating Center Steelcase® Chairs Herman Miller® Office Chairs The Original 40/4 Stacking Chairs (item #2157)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Croyden Lateral File Bars available for cabinets 30" , 36" and 42" wide Quality constructed to O.E.M. specifications. Galvanized finish. Specify cabinet size: 30, 36" or 42" exterior width. In stock & available for immediate shipping! (item #7636)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
These new cloned springs are designed to replace the encapsulated springs found in the Ergon 2 Chairs. Two springs per chair is required (item #43985)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Office Swivel Chair Mechanism Complete with 1" threaded post, small #74 bell and washer as shown Any other bell desired will be shipped as an "add-on" item not installed. There are TWO 13 1/2" Models available. Style # 01 475... (item #3802)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Stain-BUSTER Leather Cleaner removes stubborn stains completely and safely . Restores beauty to stained, soiled and worn leathers. Fast acting liquid spot and stain remover. A mild water based cleaner for use on all types of leather. Will not affect the leather's original properties or finish. Restores and vitalizes. Use it regularly to help keep leather looking like new longer. (item #4581)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
E-Z coloring of stains on fabrics. Eliminate stains permanently. Each kit is complete with seven intermixable colors, applicator, spatula, mixing cups, color mixing guide and complete instructions. Kit repairs approx 25 average sized damages. Part # 18072 net weight 1.8 oz. Price: $16.95 Each 3 or more $ 14.95 (item #2771)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Herman Miller Aeron Self-Adjustable Lumbar Support Seat Cushion Our product will work on HM Aeron Chairs size B and other office seating. Unique patented system of self-adjustable foam inserts provides "personalized" comfort and support for all types of seating. The only cushions on the market that allow the user to adjust their shape and their thickness. Velcro strips hold cushions in place on fabric covered seating. Adjustable strap provided for smooth surface seating. Made from flame retardant, washable fabric for easy care. (item #2823)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Herman Miller® For AO1 SURFACE RETAINER BRACKET For cast aluminum arms 14 and 5/8 inches long 3/4 inch wide 3 mounting holes. We can manufacturer office furniture parts from different manufacturers. Send us your request! (item #2554)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Fits all standard chairs! 7/8" x 7/16" B stem A unique glide designed to meet OSHA Tipping Standards! Tests have shown that a chair fitted with the system is more difficult to tip over than the same chair with traditional casters. The Woda Glide exceeds both OSHA and BIFMA standards. Woda Glides fits any Office Chair with removable casters. Each caster is simply replaced with a 5"diameter ("foot") which allows the chair to glide across carpet of any thickness without needing a mat. (item #2905)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)
Plastic Glides ---> 5/8" Shank, Single prong with solid plastic dome. Will not rust! A3305 3/4" dia .48 ea A3310 5/8" dia .48 ea Single Prong Metal Chair Glides ---> 5/8" shank A3270 1/2" dia .18 ea A3280 5/8" dia .22 ea A3275 3/4" dia .24 ea Rubber Cushion Chair Glides ---> Heavy gauge steel base fully rubber insulated with large area of rubber in contact with leg. Provides complete cushioning action and maximum quietness. A3290 7/8" dia $1.54 ea A3295 1-1/8" dia $1.98 ea (item #3224)
- Category:
- New Parts and Accessories
- Ships From:
- Raleigh, North Carolina (NC)